The original track remains intact and the first and second tracks that were created with the Split edit. In Split mode, when you divide a track in half, My Recordings now displays three tracks.
Displays position in hours, minutes, seconds, and milliseconds. ⑤ Marker List All recordings begin with Start and End markers. ④ Add Markers Tap the + sign to add a marker at the playhead position. See the Enhance section for more information. ③ Enhance toggle Toggle the Enhance feature on and off. ② Timeline Display See your entire timeline. ① Trim / Split Select Select your type of edit mode. See "Advanced Features," "Wind Noise Reduction" and "Left-Right Channel Swap" for more information on how these features work. Your settings will be retained in the microphone. ⑦ Advanced Features First select a preset mode, then use the advanced controls to fine tune your audio recording and dial in your sound. Other applications, such as speech, benefit from a narrow width for improved clarity with rejection of ambient (room) sound. For example, a large orchestra or ensemble recording will benefit from a wide stereo image to achieve increased separation between instruments. Tip: Consider the location of the microphone and the size of the sound source when adjusting the width. Then adjust the width of the stereo microphone pickup area. ⑥ Polar Pattern Selection Swipe to choose between Stereo, Mono Cardioid, Mono Bidirectional or Raw Mid-Side pick-up patterns. Refer to the "Preset Modes" topic for more details.
⑤ Preset Modes Select a mode to set stereo width, equalization, and compression for specific applications. Or tap the Save button to save current settings as a new custom preset. ④ Custom Presets Tap the caret to quickly access your saved presets. Tap the headphone icon to turn on the input monitor when making adjustments. ③ Microphone Gain/Monitoring Adjust the gain slider to match the volume of the sound source. The loudest peaks should reach within the target range (indicated by the shaded region between -12 and 0 dB). ② Input Meter Displays the strength of the input signal and whether that signal is mono or stereo. ① Connected Mic Status Displays the name of the connected MOTIV microphone.
Mixing link loopy hd software#
See your software user guide for information on assigning input sources. In your recording application, select the MV51 as the input source.Refer to the "Adjusting Microphone Level" topic in this guide for more details. If the audio is too quiet or causes distortion, adjust the gain manually. Use the MODE button to select the preset mode that fits your application.
Mixing link loopy hd driver#
Open the MV51 driver from the sound control panel and raise the headphone volume from the playback or output tab. Adjust the headphone volume on the Shure MV51 device driver.If your computer settings default to another device, open the sound control panel and select the MV51 device. If you can hear sound, the microphone is functioning properly. Plug headphones into the MV51 device audio output and play an audio track. Confirm that the MV51 is the selected audio device.Raise the level on both the MV51 product and the host computer for proper monitoring. The touch panel illuminates to indicate a successful connection. Use the appropriate cable (USB or Lightning).ĭrivers will be installed automatically. Connect the microphone to a computer or mobile device.The MV51 is compatible with most devices that have a USB or Lightning connector.
0 kommentar(er)
